Christmas Arts and Crafts: Sort Bells for Christmas Decor

For christmas arts and crafts, limit loose bells to 1 small project batch in a compartmented container on a raised-edge surface, rather than spreading hundreds across the table. That compact setup leaves room for hands and tools while making the eventual switch back to mealtime less disruptive.

Houseland offers gold-color iron jingle bells in 5 nominal sizes, giving your handmade decorations a choice of finer details or more noticeable accents. Plan the decoration first, calculate its bell allowance, and give each unfinished project a clearly identified place to wait.

How do I keep bells contained during christmas arts and crafts?

Set a small bell container inside a rimmed work tray, and keep the main pack closed outside your active crafting area.

1. Choose a tray about 12 in (30.5 cm) wide with a raised rim, then place it fully on the table rather than overhanging an edge.
2. Put 10 to 15 jingle bells in a shallow container inside the tray. Take out only the pieces needed for your next task.
3. Close the main pack and place it on a nearby shelf. Refill the container between tasks, keeping your christmas crafts within the tray while you thread, tie, or attach each bell.

Give loose bells, tools, and finished decorations separate zones so completed work does not crowd small pieces toward the table edge. Arrange 3 areas: the bell tray directly ahead, tools beside your working hand, and a separate box for finished christmas ornaments. Keep that box at least 6 in (15 cm) back from the table edge, away from elbows and passing plates. Move each completed piece into it before starting another. Lay scissors and pliers flat rather than across containers, and leave a clear space for lifting finished christmas decor without dragging ribbons through loose bells.

Why do tiny bells keep scattering across a shared table?

Pouring an entire pack onto an open tabletop makes tiny bells easier for sleeves, tools, and packaging to scatter. During arts and crafts, reaching across the pile can sweep several pieces away before you notice. A ribbon trailing just 2 in (5 cm) across the surface can catch bells as you lift a christmas decoration. Crinkled packaging also shifts when touched, tipping pieces toward nearby clutter. Before opening another bag, pause for 10 seconds to check where your cuffs, ribbon ends, and empty wrappers will move during the next step.

• A crowded shared table gives people more chances to bump loose pieces, so mark a clear work boundary and keep drinks and meal items elsewhere.
• Use removable tape, if suitable for the finish, to outline a 24 in (61 cm) wide workspace for christmas crafts. Ask others not to reach through it.
• Keep 1 separate surface available for mugs, snacks, and serving dishes rather than placing them between craft supplies.
• Before christmas eve preparations begin, agree on a stopping time and allow 15 minutes to return the shared table to meal use.

How should I choose bell batches for each Christmas project?

Choose each batch by multiplying your planned decoration count by the bells needed per piece, then put extras in a separate reserve container.

1. First, write down how many christmas tree decorations you intend to finish. For 12 ornaments using 3 bells each, count out 36 bells for that project.
2. Repeat the calculation for your other christmas crafts rather than estimating from the size of a handful. For a larger planning session, use Christmas Crafts for Adults: Plan Jingle Bells Packs by Proj to organize your counts.
3. Note the total on each container, and draw from the reserve only when you deliberately change the design or add another decoration.

Sort bells by project before appearance, using separate labeled containers for ornament making, gift-tag decorating, and wreath work.

• Label 1 container 'Ornaments' and add a note showing the bells allocated to each piece. Within that batch, group by appearance only if your design requires matching details.
• Label a second container 'Gift tags.' Pair its count with your christmas gift list; 8 tags needing 2 bells each require 16 bells.
• Label a third container 'Wreath' and note your planned attachment groups. Keep this christmas wreath batch assigned to that project rather than borrowing from it to finish tags or ornaments.

Should I compare one shared bell tray vs individual containers?

One shared tray takes less table space, while individual containers give each crafter a defined batch and reduce reaching across someone else's work.

Use 1 outer tray with separate inner containers when several people share a small table, accepting that extra containers also mean more lids to manage. For 3 people making christmas day crafts, try 3 shallow, lidded containers that fit together inside the tray without stacking. Check that each person can lift theirs out without shifting the other 2. Nest the empty lids together while everyone works, rather than leaving them under elbows. Before choosing this setup for christmas decor, test the fit with your actual containers; crowded handles or overlapping rims make access awkward.

From the shop

Christmas Jingle Bells, Gold-Color Iron Bells for Crafts, 6–14 mm Size Options with 50–300 Pieces per Pack

Gold-color iron jingle bells add decorative detail to holiday crafts. Choose from 5 sizes, with 50–300 bells per pack depending on the selected size.

View the gold jingle bells for crafts — 5 sizes & current price

How do I keep a wreath project contained while I work?

Place the wreath beside your contained bell station, and take out only the next 2 or 3 jingle bells you plan to attach.

1. Lay the wreath flat with its attachment area facing you, leaving enough space to turn it without touching the bell container.
2. Choose 1 small section of the wreath to decorate, then bring just those bells to that spot.
3. Attach each bell before collecting another handful; avoid resting loose pieces between branches, where they can disappear.
4. Before rotating your christmas decoration, return any unattached bells to the container and check beneath the working section for dropped pieces.

Keep bulky greenery and ribbon outside the loose-bell tray so turning the wreath cannot drag materials through the sorting area. Set ribbon rolls and spare stems on the opposite side of the wreath, with a starting gap of 6 in (15 cm) between trailing materials and the tray. Coil each cut ribbon length into 1 loose loop rather than letting its tail cross the bells. Before repositioning your christmas decor, lift dangling greenery clear with both hands. This keeps the sweeping motion of larger christmas crafts away from small, easily displaced pieces.

Which gold-color craft bells fit my Christmas decorating plans?

Gold-color iron jingle bells add decorative detail to holiday projects; separate containers and a rimmed tray provide the table organization. Their gold description refers to color, not solid-gold material, so choose them for the look you want rather than a precious-metal finish. Before attaching bells to christmas ornaments, place 1 sample beside your chosen ribbon and compare it with 2 possible background colors. Judge the combination where the finished piece will be displayed. This separates the decorating decision from the storage decision: the bells contribute the accent, while your containers keep that material manageable during shared-table crafting.

• Choose smaller bells for fine details or larger bells for a more noticeable accent, then portion your selected size into project batches. Compare 2 possible placements before committing to either look.
• For a delicate christmas decoration, position 1 smaller bell beside the ribbon or trim to check whether the surrounding details remain visible.
• For a christmas tree ornament, consider a larger bell when you want the accent to stand out among nearby decorations; assess the whole ornament before attaching it.
• Use Christmas Craft Ideas: What Size Bells for Christmas Ornamen to plan your size choice, then transfer the chosen bells into the matching project batch.

How do I clear the craft table before Christmas Eve meals?

Close and label unfinished bell batches before moving finished decorations, then lift the contained work area off the table as 1 station.

1. Secure every lid and check its closure over the tray before carrying anything away.
2. Add the project name and next task to each label, such as attaching bells to 4 remaining christmas ornaments. Keep a separate note for any christmas day crafts you plan to resume.
3. Move finished pieces to a shelf where they will not obstruct meal preparation.
4. Clear a storage spot first, then use 2 hands to carry the station, keeping it level and making another trip for anything unstable.

Check the tabletop, chair seats, and floor for stray bells before cleaning the surface and bringing food back to the table.

• Scan the bare tabletop from 2 sides, checking seams, edges, and beneath placemats for pieces left from christmas crafts.
• Inspect each chair seat, then look under the table and around chair legs. Collect loose bells before sweeping the surrounding floor.
• Clean the tabletop with a method suitable for its finish, then let it dry completely.
• Finish 1 full inspection before setting out plates or serving dishes, so your christmas dinner ideas have a cleared space ready for the meal.

Shop indoor christmas decorations & christmas ornaments from Houseland

-21%Dove Christmas Ornaments, 2-Piece Acrylic Peace Dove Ornaments for Christmas Tree and Mantel Decorfrom $34.99$44.24-19%Foam Half Ball, White Polystyrene, 15–25 cm, 1 Piece for DIY Crafts, Wedding and Christmas Decorationsfrom $29.99$36.81-17%Christmas Window Lights, Battery-Powered Hangable Lights with Warm LED Glow, 55 cm Holiday Ornamentsfrom $34.99$42.39-23%Fairy Costume Wings, Lightweight Organza Fairy Wings with Flexible Straps for Adults and Childrenfrom $34.99$45.26

See all indoor christmas decorations & christmas ornaments →