Check whether your honeycomb christmas display fits by mapping the available wall space on paper and testing a layout that includes the 19.7 in (50 cm) ledges. A convincing seasonal arrangement needs room for the shelves, the decorations resting on them, and the everyday objects nearby.
The Houseland set combines 3 pine hexagons with 3 separate ledges, giving you individual pieces to position rather than a single fixed unit. Start with width guides, then resolve missing outline measurements before treating your paper arrangement as a final installation plan.
How do I measure the wall space my Christmas display can use?
- Measure the intended display area at 3 heights, then use the smallest width as the planning boundary for your wall shelves. Run the tape horizontally near the top, through the middle, and near the bottom, keeping both ends within the area you actually want to decorate.
- Write down each reading separately; if you get 36 in (91.4 cm), 35 in (88.9 cm), and 34 in (86.4 cm), plan within 34 in (86.4 cm). Do not average the readings into a width that the tightest spot cannot accommodate.
- Mark that limiting span lightly on removable paper so your next decisions have a visible boundary.

- Define usable height and clearance around switches, door swings, furniture, and existing xmas wall decorations before choosing your shelf display arrangement. Sketch these obstacles inside 1 simple wall outline rather than treating the entire surface as available.
- Record the vertical distance between the furniture below and your intended upper limit; a usable height of 30 in (76.2 cm) is different from the wall’s full height. Mark switches and outlets as separate keep-clear zones.
- Open nearby doors through their full swing and check the furniture in its normal position. Include the projected edges of 2 existing seasonal accents, such as a wreath and hanging garland, before drawing your remaining decorating area.
How do I make templates for a honeycomb christmas display?
- For the Houseland set, label 3 paper width guides at 13.8 in (35.1 cm), 11.8 in (30 cm), and 9.8 in (24.9 cm), plus 3 ledge length guides at 19.7 in (50 cm). These represent the listed spans of the 6 wall shelves.
- Cut narrow paper strips and write each measurement directly on its matching guide. Label the hexagon guides A, B, and C, then label the ledge guides D, E, and F so your shelf display experiments remain easy to track.
- Add a small center mark to each strip for positioning. Keep those identifying letters visible when you move the guides, rather than relying on their relative lengths alone.

Treat width guides as a preliminary fit check, not exact silhouettes, until complete heights and outlines are confirmed. A horizontal strip checks 1 dimension; it cannot establish the vertical space a shape occupies or whether neighboring corners will overlap. For example, a 12 in (30.5 cm) strip says nothing about whether an outline extends 8 in (20.3 cm) or 14 in (35.6 cm) vertically. Mark unresolved areas with question marks rather than inventing proportions from memory. Keep paper christmas decorations separate from these measuring guides so a festive cutout does not accidentally become your reference for an unconfirmed shelf outline.
Which arrangement should I try on a narrow or wide wall?
- Try 3 arrangements inside the same measured boundary: a compact cluster, a taller staggered layout, and a wider grouping. Give each version a separate sketch so you can compare your christmas wall decor without remembering earlier positions.
- For the compact version, gather the shapes around 1 center; for the taller version, offset them upward rather than forming a rigid column. On a narrow wall, check whether that upward movement feels intentional beside nearby vertical features.
- For the wider version, extend the composition sideways while keeping its visual center clear. Photograph all 3 options from the same doorway to judge the xmas wall art as part of the room.

Compare the wall arrangement with a tabletop display if the paper layout competes with furniture or makes the room feel crowded. Mock up 2 alternatives: a vertical composition above the furniture and a contained christmas village display on its surface. View both from about 6 ft (1.8 m) away, then check whether the tabletop option leaves room for everyday use. Wall Shelf Display or Christmas Table Decorations? offers another way to frame that choice. If christmas flower arrangements already occupy the surface, test 1 combined seasonal grouping instead of assuming that adding decorations to both levels will feel balanced.
What do I give up by packing Christmas decorations closer together?
Leave roughly half the display positions visually empty as a starting point so the honeycomb pattern remains readable. On a sketch with 8 possible accent positions, fill about 4 first and let the remaining spaces reveal the underlying geometry. Packing the shelf display more tightly gives you room for additional christmas wall decor, but sacrifices the pauses that help individual pieces stand apart. How many colors can one shelf display hold? is a useful companion question when that density also introduces competing colors. Remove 1 accent at a time until the structure feels visible rather than merely supporting a layer of ornaments.
- Choose between a few larger accents and several smaller decorations by comparing their paper silhouettes for crowding and visual balance. Trace the decorations you actually own, including projecting branches or ribbon tails, rather than reducing everything to neat circles.
- Test 2 larger silhouettes against 5 smaller ones without changing the shelf positions. A silhouette measuring 7 in (17.8 cm) across may dominate its neighbors, while several tiny shapes can create a scattered effect.
- Use different pencil marks for pine cone crafts and paper christmas decorations so you can track their distribution. Compare 1 loosely grouped version with 1 evenly spaced version, then choose the arrangement whose individual accents remain easy to distinguish.
Quick summary
- Use the narrowest of 3 wall-width measurements to establish the planning boundary for your wall shelves, with switches, furniture, and door movement accounted for.
- Compare a compact cluster, a taller staggered layout, and a wider shelf display within the same boundary; consider a tabletop arrangement if the wall feels crowded.
- Begin with roughly half the display positions visually empty, then compare decoration silhouettes to preserve readable shapes and useful gaps.
- Check decorations against the 3.5 in (9 cm) shelf depth rather than assuming that a successful wall layout means every object will fit.
- Photograph the selected paper layout and record its spacing, but confirm installation requirements separately before making holes.
Quick answers
Which paper width guides should I prepare?
Prepare 3 hexagon width guides at 13.8 in (35.1 cm), 11.8 in (30 cm), and 9.8 in (24.9 cm). Treat them as preliminary checks until complete heights and outlines are confirmed.
How can I compare the arrangement from everyday viewpoints?
View the planned grouping from the doorway and your usual seat, checking that it stays within the measured boundary and retains useful visual gaps.
What should I do if the wall grouping crowds the room?
Compare the paper wall arrangement with a tabletop display, especially if the layout competes with furniture or makes the room feel crowded.
What matters when positioning tiny figurines?
Account for the open backs when placing small figurines, because the modules have no backing panel to stop pieces passing through an opening.

From the shop
6-Piece Pine Honeycomb Wall Shelves
The 6-Piece Pine Honeycomb Wall Shelves combine 3 hexagons and 3 separate ledges. Each module hangs independently and is 3.5 in (9 cm) deep.
View the pine six-piece honeycomb wall shelves & current priceAre the 6-Piece Pine Honeycomb Wall Shelves a fit for my plan?
Choose the 6-Piece Pine Honeycomb Wall Shelves when your plan needs 3 pine hexagons and 3 separate ledges rather than one continuous shelf. That combination suits a shelf display built around distinct geometric elements, with Christmas wall decor distributed between framed openings and straight surfaces. Give each of the 6 pieces a specific role on your drawing, such as an ornament focal point or a quieter supporting line. If your idea depends on an uninterrupted platform for a connected scene, reconsider that requirement before choosing. The Houseland set makes more sense when the mixed shapes are part of the intended composition.
Check every intended decoration against the 3.5 in (9 cm) shelf depth, because fitting the wall does not establish whether an object fits its resting surface. Measure each base from front to back, including projecting feet or supports. For a Christmas village display, a building with a 4 in (10.2 cm) base exceeds that depth even if its facade looks suitably small. Check a pine cone Christmas tree at its stand, not just its widest branches. Use Best display shelf for collectibles: what depth decides to distinguish usable support from visual fit before assigning each decoration a place.
Product details for this use case: HOUSELAND Pine Six-Piece Honeycomb Wall Shelves
- Best for: Small pots, frames, and decorative objects that fit the 3.5 in (9 cm) depth
- Material: Natural pine wood with clear matte lacquer
- Size: Hexagon widths: 13.8 in (35.1 cm), 11.8 in (30 cm), 9.8 in (24.9 cm); 3 ledges: 19.7 in (50 cm) long each; depth: 3.5 in (9 cm)
- Important features: 3 hexagons, 3 separate ledges, independent keyhole hangers, mounting hardware included
- Trade-off: Open backs provide no backing panel to stop small objects passing through; pine grain, knots, and tone vary.
- Price:
- $146.43
$183.03(19% off), in stock
- $146.43
- Shipping: orders are processed within 1 to 3 business days; Express Shipping to the United States arrives within 5 to 8 business days, and tracking is emailed when the order ships. Shipping policy
- Returns: accepted within 30 days of delivery. Return policy
- Product page: 6-Piece Pine Honeycomb Wall Shelves
How should I choose the final layout before Christmas?
- Choose the shelf display that respects your measured boundary, preserves useful visual gaps, and looks balanced from both the doorway and your usual seat. Judge the arrangement from these 2 viewpoints before committing.
- Take 1 photograph from each position with the camera held level. Look for a grouping that reads clearly without relying on a close-up view.
- Compare the left and right sides for visual weight, allowing about 30 seconds per photograph rather than immediately adjusting individual pieces.
- Select 1 final version of your Christmas wall decor and note the deciding reason, such as a calmer outline or a clearer focal point.

Plan around the space you actually have, because every module hangs independently on its own keyhole hanger rather than requiring one fixed arrangement. You can use 1 hexagon by itself instead of treating all 6 pieces as an inseparable unit. For these wall shelves, that flexibility lets the chosen composition respond to an awkward wall rather than forcing a continuous run across it. Mark each module as either essential or optional, then consider whether the optional pieces belong elsewhere. Keep any existing xmas wall art on the drawing so its position remains part of the decision, not an obstacle discovered afterward.
How do I turn the paper plan into a Christmas-ready display?
- Photograph the chosen templates, record their spacing, and confirm installation requirements separately before removing paper or making holes for the wall shelves. Save 1 straight-on overview that shows the entire shelf display.
- Label each template and record its position relative to 2 stable reference points, such as a wall corner and the floor. Write down actual measurements rather than estimating from the photograph.
- Make 1 separate installation checklist covering wall construction, appropriate fixings, concealed services, and the mounting instructions for the shelves you selected.
- Keep the paper in place until those questions are resolved; a layout photograph alone is not a drilling guide.
Position small figurines with the open backs in mind, because these modules have no backing panel to stop pieces passing through an opening. For a Christmas village display, review 1 miniature at a time rather than assuming the wall-facing side provides containment. A figure measuring 1 in (2.5 cm) across deserves particular attention if it could slip through the space behind its intended position. Apply the same check to loose pieces in pine cone crafts, including detached decorative details. Read How to Display Small Figurines on a Wall Shelf before deciding where the smallest accents belong in the finished arrangement.
Shop floating wall shelves & corner wall shelves from Houseland
-20%9-Piece Pine Hexagon Wall Shelf Setfrom $165.50
-20%6-Piece Rounded Pine Box Wall Shelvesfrom $160.78
-20%6-Piece Pine Cube and Ledge Wall Shelvesfrom $152.00
-20%6-Piece Staggered Pine Wall Shelvesfrom $151.15
-20%5-Piece Matte Black Wall Shelf Setfrom $155.59
-20%9-Piece Matte Black Hexagon Wall Shelvesfrom $174.58