Hobby Lobby Christmas Garland with Lights for Small Trees

A festive Christmas tinsel garland with multicolored lights draped over a wooden staircase railing in an indoor setting

You can make a small Christmas tree look full and sparkly with a hobby lobby christmas garland, layered over fluffed branches, without buying a whole new set of decorations. Fluffing takes about 15 minutes in 3 sections, and tinsel placed inside the tree fills gaps that ornaments on the tips leave visible.

Houseland offers the thick plastic tinsel garland in 78.74 in (200 cm) and 196.85 in (500 cm) lengths, with multicolor LED bulbs included and AA batteries not included.

How can a small tree look full and sparkly without new decorations?

Fluffing every branch tip and shaping the tree before you decorate gives a small tree a fuller base without buying new decorations. Work from the bottom up in 3 sections, pulling each tip outward for about 15 minutes. Artificial trees right out of the box look thin because branches stay compressed, so this step alone can add visible width. Add christmas lights inside the branches next, so glow comes from within the tree, and leave outer tips free for christmas decoration and ornaments.

Weaving garland through bare spots and placing larger ornaments near the trunk adds depth that surface ornaments alone cannot create. For a fuller result, read how garland fills a tree without a new tree before layering. Use garlands in 2 layers, deep inside and near tips, about 6 in (15 cm) apart.

  • Fluff branch tips first, then fill bare spots with greenery picks in 3 to 4 places.
  • Hang larger or reflective ornaments within 2 in (5 cm) of the trunk to hide gaps.
  • Weave christmas garland and ribbon through middle branches, not only the outer edge.

Shiny tinsel strands catch light from every angle, so a lighted garland makes a thin tree look brighter and more crowded. The multicolor glow from led christmas lights spreads across a lighting distance of 3.3 ft to 16.4 ft (1 to 5 m), which helps a small tree read as festive from across a room. Place the brightest wraps near the middle of the tree, where 2 or 3 bare patches usually show, and let the metallic strands fill the space between branches. This classic look works with ornaments you already own.

A red, green, and gold metallic tinsel Christmas garland with multicolor LED lights drapes across Christmas tree branches

Why does a tree look thin even when it has ornaments?

A tree looks thin after storage because its branches stay compressed and its tips point downward until you reshape them. Fluff each branch for about 10 minutes, in 3 layers from the trunk outward, and spread tips so no straight gaps run from top to bottom. A faux christmas tree that spent 11 months in a box needs this reset before decoration can hide thin spots. Artificial christmas trees also benefit from extra fir garlands after fluffing, which build fullness ornaments alone cannot create.

Ornaments alone do not fill a tree, because depth and placement matter more than the number of ornaments you add. Adding 20 small balls to the outer tips still leaves the trunk visible, while 5 larger pieces 2 in (5 cm) from the trunk create shadow and depth. Step back 6 ft (183 cm) after every 10 ornaments to check for bare patches, then move a piece inward instead of buying another box. Use christmas ornaments and christmas tree decorations you already own.

What should I check before choosing a garland for a small tree?

Measure your tree and count the wraps you need before you choose a garland length, so it fills gaps instead of running out halfway. If space is tight, the guide to faux trees for a tiny flat and a small tree can help you judge scale for christmas tree garland and small christmas trees. A tree 4 ft (122 cm) tall needs 2 to 3 wraps, while a tree 6 ft (183 cm) tall needs 4 to 5 wraps. Measure the widest part, often 36 in (91 cm) around, leaving 12 in (30 cm) spare.

Thick plastic tinsel with a metallic shine fills gaps better than thin tinsel, because each strand reflects light and adds visible bulk. For classic christmas decor, check thickness, shine, and length together before you buy garlands.

  • Choose thick strands that hold shape around 2 or 3 branches, rather than flat strands that disappear between tips.
  • Pick a metallic finish that catches light from 4 directions: front, side, above, and below the branch.
  • Use 1 of the 2 length choices to match your tree, instead of joining short pieces that leave joins visible.

Battery power and built-in lights keep setup simple, because you can hang the garland where an outlet is out of reach. Led christmas lights come included as bulbs, AA dry batteries are not included, and there is no remote control and no dimming, so there are only 2 steps: insert batteries and drape the garland. Check the battery fit in 5 minutes before decorating day, so a tree can be dressed in 1 evening without extra wiring for christmas lights.

How do I choose between 78.74 in (200 cm) and 196.85 in (500 cm) of tinsel garland?

The 78.74 in (200 cm) christmas tree garland length suits a small tree, while the 196.85 in (500 cm) length suits a taller tree that needs more wraps. Both lengths are sold as 1 piece, so choose by tree size, not by buying 2 short garlands. A tabletop tree 3 ft (91 cm) tall needs the shorter length, while a 5 ft (152 cm) tree needs the longer length for 4 to 6 wraps.

Length Best fit Wraps
78.74 in (200 cm) Tabletop and bedroom-corner trees 2 to 3
196.85 in (500 cm) Taller small christmas trees 4 to 6

A garland with lights already built in removes the need to buy or untangle a separate light string for a small tree. Battery power means you can hang it where an outlet is out of reach, such as a corner 8 ft (244 cm) from the nearest socket, and still get glow in 1 step.

  1. Drape the thick tinsel first, with led christmas lights and christmas lights built in.
  2. Check the glow from 6 ft (183 cm) away before adding ornaments.
  3. Add ornaments only where gaps remain after 2 passes.

A red, green, and gold tinsel Christmas garland with multicolor LED lights forms two loops beside a green paper chain

Quick summary

  • Fluff in 3 sections for 15 minutes, then layer a hobby lobby christmas garland inside and near the tips, making a small tree look full and sparkly.
  • Measure the tree first as a guide and choose 78.74 in (200 cm) for a tabletop tree or 196.85 in (500 cm) for a taller small tree.
  • Use built-in multicolor LED lights and thick metallic tinsel with battery power to place a small tree away from an outlet without a separate light string.
  • Drape in 4 steps from inside outward, then check from 6 ft (183 cm) and add ornaments only where gaps remain.

Quick answers

Does this garland need an outlet?

No, it runs on AA dry batteries that are not included, so you can hang it in a corner away from an outlet.

Is the garland dimmable or remote controlled?

No, it has no remote control and is not dimmable, so setup stays simple with only batteries and draping.

Can I use it outdoors?

Yes, it suits indoor and outdoor holiday parties and New Year celebrations, with a metallic look and multicolor glow.

What lengths are available?

It is sold as 1 piece in 78.74 in (200 cm) or 196.85 in (500 cm), so choose by tree size and wrap count.

A rectangular doorway decorated with a green artificial holiday garland wrapped in warm white and multicolored Christmas lights, shown against a beige wall with a wooden floor and a small bench at the lower left.

From the shop

Christmas Tree Tinsel Garland with Multicolor LED Lights, Thick Metallic Christmas Tinsel Garlands for Holiday Decor

The Multicolor LED Christmas Tinsel Garland adds thick metallic sparkle and built-in multicolor lights to a small tree, in 78.74 in (200 cm) or 196.85 in (500 cm), with AA batteries not included.

View the multicolor led christmas tinsel garland — 2 sizes & current price

What are the trade-offs of a lighted tinsel garland?

The trade-off for simple setup is control, because this garland has no remote control and is not dimmable. You gain 2 benefits, lights built in and battery placement anywhere, but you lose 2 controls, remote switching and brightness adjustment. AA dry batteries are not included, so keep 1 spare set ready if you plan to light the tree for 4 hours each evening. Led christmas lights still give a cheerful multicolor glow, but brightness cannot be adjusted, so test 1 wrap in the evening before wrapping the whole tree.

Multicolor is the only colour choice, so the garland suits a classic festive look better than a single-colour scheme. Specifications are plastic, multicolor LED bulbs included, and 3V AA batteries not included. That mix gives a cheerful glow for Christmas and New Year, but a warm white tree will gain several colours at once. If ornaments are already multicolor, this matches in 1 step; if single-colour, test 1 wrap from 6 ft (183 cm) first, before wrapping the whole christmas garland.

Tinsel adds shine and bulk fast, while faux greenery picks add natural depth, so the best small-tree result often uses both in moderation. Balance shine and texture for christmas tree decorations and christmas decor.

  • Use tinsel for 2 to 3 shiny wraps where the tree looks bare, especially near the middle.
  • Add greenery picks in 3 to 4 bare spots for texture, because tinsel alone can look flat from 2 ft (61 cm) away.
  • Keep 1 balance rule: shine should frame the tree, not cover more than half of the branch tips.

How does a hobby lobby christmas garland fit a small-space tree?

A bare-looking tree or a plain bedroom corner gets an easy fix from thick metallic tinsel that adds glow and festive colour. Houseland offers this thick metallic garland for indoor and outdoor holiday use throughout the season, so it can move from a tree to a party corner after Christmas. Drape 2 wraps around a small tree, step back 6 ft (183 cm), and add a third wrap only where 2 or more gaps remain. This christmas garland with lights adds glow without a new set of christmas decoration pieces.

A heart-shaped multicolor tinsel Christmas garland with built-in LED lights draped over a wooden dresser in a bedroom setting

The specifications fit a small-space tree, because the garland combines thick plastic tinsel, multicolor LED bulbs, and battery power in 1 piece, with led christmas lights for a small christmas tree. It comes in 78.74 in (200 cm) or 196.85 in (500 cm), and runs on 3V AA dry batteries that are not included. LED bulbs are included, with no remote control and no dimming. Indoor and outdoor use means it can dress a tree or mantel.

Built-in lights make this garland a practical fit for a small tree, because there is no separate light string to untangle or plug in. After the tinsel is in place, ornament sets that suit a small tree display can fill the remaining gaps without crowding the branches. Battery power lets you place the tree 8 ft (244 cm) from an outlet, and 2 wraps give enough glow from 6 ft (183 cm) away for small christmas trees, adding christmas ornaments only after checking the glow.

Product details for this use case: HOUSELAND Multicolor LED Christmas Tinsel Garland

  • Best for: Small Christmas trees and bare corners that need fullness and multicolor sparkle
  • Material: Thick plastic tinsel with a metallic shine
  • Size: 78.74 in (200 cm) or 196.85 in (500 cm), sold as 1 piece
  • Important features: Multicolor LED bulbs included, battery powered by 3V AA dry batteries, for indoor and outdoor holiday use
  • Trade-off: No remote control and no dimming, and AA batteries are not included, so setup stays simple but brightness cannot be adjusted
  • Price by option:
    • Multicolor / 196.85 in (500 cm): $34.99 $45.30 (22% off), in stock
    • Multicolor / 78.74 in (200 cm): $34.99 $45.30 (22% off), in stock
  • Shipping: orders are processed within 1 to 3 business days; Express Shipping to the United States arrives within 5 to 8 business days, and tracking is emailed when the order ships. Shipping policy
  • Returns: accepted within 30 days of delivery. Return policy
  • Product page: Christmas Tree Tinsel Garland with Multicolor LED Lights, Thick Metallic Christmas Tinsel Garlands for Holiday Decor

How should I drape lighted tinsel garland on a small tree?

Drape tinsel in 4 steps, starting inside the tree and working outward, so the shine fills gaps instead of sitting only on the surface. This order takes about 20 minutes for a tree 4 ft (122 cm) tall.

  1. Fluff branch tips for 10 minutes, in 3 sections, bottom to top.
  2. Wrap the first layer of christmas garland deep inside, spacing wraps about 6 in (15 cm) apart.
  3. Add a second layer near the tips, checking from 6 ft (183 cm) after every 2 wraps.
  4. Place ornaments in remaining gaps, using 5 larger pieces near the trunk, as a christmas tree decorating ideas step.

A festive Christmas window garland with a scalloped valance and vertical panels, decorated with multicolored lights and

After Christmas, the same garland can move to a New Year party corner, because it suits indoor and outdoor holiday parties alike. The metallic look and multicolor glow suit Christmas and New Year decorating, and it also works as outdoor christmas lights for a covered porch or party corner. Move it in 5 minutes, drape it over a mantel 4 ft (122 cm) long, and check the glow from 6 ft (183 cm) before guests arrive. This reuse keeps christmas decor festive for a second celebration.

Shop indoor christmas decorations & christmas ornaments from Houseland

Dove Christmas Ornaments, 2-Piece Acrylic Peace Dove Ornaments for Christmas Tree and Mantel Decor-21%Dove Christmas Ornaments, 2-Piece Acrylic Peace Dove Ornaments for Christmas Tree and Mantel Decorfrom $34.99$44.24Foam Half Ball, White Polystyrene, 15–25 cm, 1 Piece for DIY Crafts, Wedding and Christmas Decorations-19%Foam Half Ball, White Polystyrene, 15–25 cm, 1 Piece for DIY Crafts, Wedding and Christmas Decorationsfrom $29.99$36.81Christmas Window Lights, Battery-Powered Hangable Lights with Warm LED Glow, 55 cm Holiday Ornaments-17%Christmas Window Lights, Battery-Powered Hangable Lights with Warm LED Glow, 55 cm Holiday Ornamentsfrom $34.99$42.39Fairy Costume Wings, Lightweight Organza Fairy Wings with Flexible Straps for Adults and Children-23%Fairy Costume Wings, Lightweight Organza Fairy Wings with Flexible Straps for Adults and Childrenfrom $34.99$45.26

See all indoor christmas decorations & christmas ornaments →

Questions people ask about this

Can I use lighted tinsel garland on a real tree as well as a fake tree?

Yes, the same layering works on a real tree and a fake tree. Fluff the branches, place tinsel deep inside first, then add a second layer near the tips and check for gaps from across the room.

How many wraps should I plan for a tabletop tree?

Plan 2 to 3 wraps for a tabletop tree, and 4 to 6 wraps for a taller small-space tree. Measure the widest part first, then leave spare length for the top and the base.

Will multicolor lights clash with warm white ornaments I already own?

They can change the look, so test 1 wrap first before wrapping the whole tree. View the tree from 6 ft (183 cm) in the evening, then decide whether the multicolor glow suits your warm white ornaments.

Where is the best place to put the battery end on a small tree?

Put the battery end near the trunk, behind a full branch, so it stays hidden and easy to reach. Keep it clear of the tree skirt and check the glow before adding the final ornaments.

Can I move the garland to a mantel after Christmas?

Yes, it suits indoor and outdoor holiday parties and New Year celebrations. Drape it over a mantel or doorway, check the glow from across the room, and keep the battery end hidden behind decor.

What should I do if tinsel looks flat after storage?

Shake it out gently, separate the strands by hand, and drape it in 2 layers on the tree. Fluff the tree branches first, then let the metallic strands catch light from several angles.

Do I need a separate light string with this garland?

No, lights are already built into the garland, so there is no separate light string to buy or untangle. Battery power also lets you hang it where an outlet is out of reach.