Is There a Paper Template Included to Help Map Out the Wall

If you wonder whether is there a paper template included in the box to help map out the arrangement on the wall before drilling, the short answer is no. You will not find a full-sized paper layout guide inside the box. Instead, you receive nine separate shelf modules designed for flexible placement using your own simple tape template method.

The Houseland 9-piece set features natural pine wood with a clear matte lacquer finish, giving you six hexagons across three sizes and three 19.7 in straight ledges to mount on your wall. Because a single sheet of paper cannot predict how you want to cluster or separate these pieces, making a custom paper or tape template gives you far better control over your wall arrangement.

Is There a Paper Template Included in the Box to Help Map Out the Arrangement on the Wall?

When unboxing modular wall shelves, many homeowners expect a large printed sheet of paper showing exactly where to drive every screw. With this set, there is no factory paper template included in the box. That absence is actually intentional. Packing a single fixed paper pattern would defeat the main advantage of a nine-piece modular set: total flexibility in how you arrange your room decor.

This set includes six hexagon shelves and three straight ledge shelves. The six hex modules are divided across three distinct widths: two 13.8 in (35 cm) wide, two 11.8 in (30 cm) wide, and two 9.8 in (25 cm) wide. The three straight ledges measure 19.7 in (50 cm) long. Every piece shares a depth of 3.5 in (9 cm) and a board thickness of 0.6 in (1.5 cm). Because each Houseland shelf module uses open backing with no back panel, keyhole hanger hardware comes pre-mounted directly on the back of the pine frame.

A static paper sheet would force you into one rigid layout. You might want to cluster your hexagon shelves into a tight honeycomb grid above a couch, mount two straight ledge shelves below television screens, or run a single staggered line of hex shelves up a staircase wall. Rather than relying on a printed paper insert that might wrinkle or shift during alignment, creating your own precise template takes less than ten minutes and guarantees your drill holes match the keyhole hangers on the back of each shelf.

How to Make a Custom Drilling Template with Painter's Tape

Hanging wooden floating shelves with rear keyhole slots requires pinpoint accuracy. If your screw heads are off by even an eighth of an inch, the shelf will sit crooked or fail to slide down into the mounting slots. Fortunately, you do not need factory paper guides to achieve a perfect level install. You can use a piece of painter's tape placed over the back of the shelf to mark the keyhole distances, then transfer that tape directly to the wall as a drilling template.

This tape method works on both straight ledge shelves and multi-sided geometric shelves. Here is the step-by-step process to map out your wall layout with perfect hole spacing:

1. Prepare the shelf back: Turn the shelf over so the rear frame and pre-mounted keyhole hangers face upward on a clean, flat surface.
2. Apply painter's tape: Unroll a strip of blue low-tack painter's tape and press it firmly across the back of the shelf, directly over the keyhole slots.
3. Mark the mounting points: Take a sharp pencil or fine marker and push the tip directly through the tape into the narrow top groove of each keyhole slot. This marks the exact location where your wall screw shaft must rest.
4. Transfer tape to the wall: Carefully peel the painter's tape off the rear wood frame and press it onto your wall at your desired mounting location.
5. Check for level alignment: Place a bubble spirit level along the top edge of the painter's tape strip. Adjust the tape until the bubble centers perfectly before smoothing the adhesive against the drywall.
6. Drill through the pencil marks: Drill your anchor holes directly through the marked points on the tape. Once holes are drilled and anchors inserted, peel the tape away from the drywall.

If you are updating your room background before installing natural wood floating shelves, review our guide on Stop Wall to Wall Floating Shelves From Scuffing Paint to keep your fresh paint crisp and scuff-free.

Planning Layouts for Hexagon Shelves and Straight Ledges

Before driving fasteners into drywall, trace your overall layout across the room. A nine-piece set offers enough modules to build two full wall runs or fill one expansive focal wall that previously looked bare. Planning your spacing on paper or cardboard prevents unnecessary patching later.

A practical way to preview geometric shelves on a wall is cutting craft paper or cardboard to match the outer dimensions of your modules. Cut six hexagons (two at 13.8 in, two at 11.8 in, and two at 9.8 in) and three rectangles measuring 19.7 in by 3.5 in. Stick these paper cutouts onto the drywall with painter's tape. You can shift them around until you find a balanced proportion for your room.

Popular arrangements for these pine shelves include:

• The Honeycomb Cluster: Group all six hex shelves together with uniform outer gaps to form a honeycomb structure. Place two straight ledge shelves underneath as grounding base display shelves.
• Symmetrical Bedside Anchors: Hang three hexagon shelves above bed headboards on the left and right, creating balanced plant wall shelves for trailing ivy or small books.
• Split Room Accent Runs: Divide the set across two separate areas. Place four hex shelves in an entry hallway and reserve two hexagons with three ledge shelves for living room wood shelves.
• Staggered Staircase Climb: Mount the hexagon shelves along an angled ascending path parallel to your stair railing, filling high vertical wall space.

When incorporating geometric shapes into Scandinavian or minimalist interiors, consult our tutorial on How to Style Light Pine Wall Shelves in a Warm Neutral Room for curated layout ideas. You can also explore our complete wall shelves collection for coordinating home storage solutions.

Drywall Anchors, Keyhole Slots, and Load Ratings

Mounting shelves on a wall securely requires choosing the correct wall anchors for your drywall type. Keyhole hangers rely on a screw head protruding slightly from the wall surface. When you slide the shelf down onto the screw, the screw head locks into the narrow upper slot of the keyhole bracket, holding the frame flush against the wall.

Never rely on lightweight hardware for hanging solid wood modules. Standard plastic ribbed drywall anchors (often included in cheap kits) are only rated for 5 to 15 pounds and are highly susceptible to pulling out under cantilevered loads. Because floating shelves project outward from the wall surface, any item placed on the outer edge exerts leverage on the top mounting anchor.

With a load rating of up to 5 kg per piece, Houseland constructs these warm honey pine modules for practical, stable display on drywall or studs. To ensure your installation stays firm over time, select the proper hardware based on your wall structure:

To understand how natural timber frames hold up compared to synthetic board alternatives, check our analysis on are pine wall to wall floating shelves sturdier than MDF. For additional details on timber structural integrity across various frame dimensions, see our comparative guide on Are Pine Wall to Wall Floating Shelves Sturdier Than MDF.

Styling and Weight Considerations for Pine Floating Shelves

Once your wooden shelves for wall installation are leveled and mounted, thoughtful styling completes the transformation. The clear matte lacquer over sanded natural pine offers a lead free finish that highlights organic wood grain while protecting the surface from dust and minor moisture.

Because these open modules feature no back panel, your wall color shows directly through each hexagon frame. Accentuate this depth by pairing dark or saturated paint tones behind light honey pine wood shelves. Keep heavy objects close to the rear mounting edge to minimize forward leverage on keyhole brackets, while scattering lighter decorative accents across the upper ledges.

From the shop

Wooden Floating Shelves, 9-Piece Pine Hexagon and Ledge Wall Set

This 9-piece set includes six natural pine hexagons across three widths and three 19.7 in straight ledges, built with keyhole hangers for a clean wall-mounted installation.

View the 9-piece pine hexagon set — dimensions & current price

By making your own painter's tape template, selecting solid hollow-wall anchors, and anchoring your pieces securely, you can position your wooden floating shelves with total confidence without needing a factory paper guide in the box.