6-Piece Matte Black Floating Wall Shelves

Pine wood in a matte black finish. Every module is 3.5 in (9 cm) deep with a 0.6 in (1.5 cm) board, and the finish is matte black, sanded smooth. It is solid timber rather than a veneered board, so the edges show real wood.

Up to 5 kg per piece. That covers plants, ceramics, candles, framed photographs and a short run of paperbacks. It is not built for a full row of hardbacks or anything you would call storage, which is what the slim 3.5 in depth is telling you.

Every module has a keyhole hanger routed into the back, and the mounting hardware is in the box. Mark the screw positions, fit them to a fixing suited to your wall, then drop each piece on. No brackets are visible once it is up.

Three straight ledges at 19.7 in (50 cm) each, plus three hexagons at 13.8, 11.8 and 9.8 in wide. The extra ledge is what separates it from the five-piece black set, which trades one ledge for a longer 27.6 in run.

It is a matte black surface finish over solid pine, not a stain, so the modules read as solid black rather than as dark timber with grain showing through.

3.5 in (9 cm), deliberately slim. That is enough to stand a small pot, prop a frame or hold a row of paperbacks without the shelf projecting into a hallway or catching shoulders in a narrow room.

No. They are open on the back, which is what makes them read as light on the wall rather than as boxes stuck to it. It also means anything smaller than the opening can pass straight through, so keep very small objects toward the front.

The finish is matte black. The matte black finish shows dust and fingerprints more readily than the natural pine, so it wants an occasional wipe. Two sets are never identical because the timber is not, and that variation is normal rather than a fault.

Dust with a dry cloth and wipe with a barely damp one if needed, then dry it. Do not soak the timber or use solvents on the finish. Nothing needs oiling, waxing or resealing over the life of the shelves.

In the box are the 6 shelf modules and one mounting hardware set, packed flat with the corners protected. Shipping is free and tracked. If a piece arrives split or chipped, send a photo within 30 days of delivery for a replacement or refund.

The set is three matte black hexagons, 13.8, 11.8 and 9.8 in wide, plus three straight 19.7 in ledges. Hang them as one long run or split them into two smaller clusters; every module has its own keyhole hanger, so the ledges can also hang apart from the hexagons. At 3.5 in deep, the arrangement reads as a wall feature rather than a shelf unit.

A little. The matte black finish shows dust and fingerprints more readily than the natural pine, so an occasional wipe keeps it looking sharp. Dusting with a dry cloth, or a barely damp one for fingerprints, is the whole routine, since nothing about the finish needs oiling, waxing or resealing.

It is solid pine, not a veneered board, sanded smooth before the matte black finish goes on. Every module hides its keyhole hanger inside the back so no bracket shows, the board is a consistent 0.6 in thick across all six pieces, and one hardware set in the box covers the whole run.

It suits light decor: plants, ceramics, candles, framed photographs and a short run of paperbacks, all within the 5 kg per piece load rating. It is not meant for a full row of hardbacks or real storage, since the boards are only 0.6 in thick and every piece sits just 3.5 in off the wall.

Yes. Each piece is only 3.5 in deep, so the modules sit close to the wall instead of jutting into a hallway, and the open backs keep them looking light rather than boxy. Every module mounts on its own keyhole hanger, so you can hang one hexagon or one ledge first and add the rest as space allows.

No. The modules are open, with no backing panel, which is what lets the hexagons and ledges read as light shapes on the wall instead of boxes fixed to it. The trade-off is that anything smaller than the opening can pass through, so keep very small objects toward the front.

It is pine wood, not metal. Pros: solid pine rather than a veneered board, a hidden keyhole hanger so no bracket shows, and one hardware set covering all six pieces. Cons: the matte black finish shows dust and fingerprints more readily than natural pine, so it needs more frequent wiping, and the open back means anything smaller than the opening can pass through.

Each module already has a keyhole hanger routed into the back: mark the screw positions, fix each screw into a wall fixing suited to your wall type, then drop the piece onto it. No bracket is visible once it is up. One mounting hardware set covers all six pieces; there is no separate anchor kit by wall type, so choose fixings for what is behind your wall.