5-Piece Matte Black Wall Shelf Set

Pine wood in a matte black finish. Every module is 3.5 in (9 cm) deep with a 0.6 in (1.5 cm) board, and the finish is matte black, sanded smooth. It is solid timber rather than a veneered board, so the edges show real wood.

Up to 5 kg per piece. That covers plants, ceramics, candles, framed photographs and a short run of paperbacks. It is not built for a full row of hardbacks or anything you would call storage, which is what the slim 3.5 in depth is telling you.

Every module has a keyhole hanger routed into the back, and the mounting hardware is in the box. Mark the screw positions, fit them to a fixing suited to your wall, then drop each piece on. No brackets are visible once it is up.

A matte black finish over the same solid pine used in the natural sets, sanded smooth before finishing. It is a surface finish rather than a stain, so the pieces read as solid black rather than as dark wood grain.

27.6 in (70 cm), with a second ledge at 19.7 in (50 cm) and three hexagons from 13.8 down to 9.8 in wide. Everything is 3.5 in (9 cm) deep.

3.5 in (9 cm), deliberately slim. That is enough to stand a small pot, prop a frame or hold a row of paperbacks without the shelf projecting into a hallway or catching shoulders in a narrow room.

No. They are open on the back, which is what makes them read as light on the wall rather than as boxes stuck to it. It also means anything smaller than the opening can pass straight through, so keep very small objects toward the front.

The finish is matte black. The matte black finish shows dust and fingerprints more readily than the natural pine, so it wants an occasional wipe. Two sets are never identical because the timber is not, and that variation is normal rather than a fault.

Dust with a dry cloth and wipe with a barely damp one if needed, then dry it. Do not soak the timber or use solvents on the finish. Nothing needs oiling, waxing or resealing over the life of the shelves.

In the box are the 5 shelf modules and one mounting hardware set, packed flat with the corners protected. Shipping is free and tracked. If a piece arrives split or chipped, send a photo within 30 days of delivery for a replacement or refund.

Yes. Each piece is only 3.5 in deep, so the set sits flat against the wall instead of jutting into a hallway, and the open-backed modules read as light shapes rather than a bulky box. Every module hangs on its own keyhole hanger, so you can start with just the two ledges or a single hexagon and add pieces later.

The set gives you three hexagon widths, 13.8, 11.8 and 9.8 in, plus a short 19.7 in ledge and a long 27.6 in ledge, so you can build a cluster of different shapes rather than one uniform row. Because every piece is only 3.5 in deep, the arrangement reads as a wall feature rather than a shelf unit sitting on the wall. Each module hangs on its own keyhole hanger, so the layout is yours to plan before you mark any screws.

A little, yes. Houseland's matte black finish shows dust and fingerprints more readily than the natural pine finish, so it is worth an occasional wipe rather than letting marks build up. Dusting with a dry cloth, or a barely damp one for fingerprints, is the full routine, and the finish never needs oiling, waxing or resealing.

Look at the chassis and the hardware. It is solid pine, sanded smooth before the matte black finish goes on, rather than a veneered board; every module hides its keyhole hanger in the back so no bracket shows; and the board is a consistent 0.6 in thick across all five pieces. One hardware set in the box covers the whole run.

It is pine wood throughout, not metal. Pros: solid pine construction, an open back that keeps the pieces looking light rather than boxy, a hidden keyhole hanger so no bracket shows, and one hardware set that covers all five pieces. Cons: the matte black finish shows dust and fingerprints more readily than natural pine, so it wants more frequent wiping, and the open back means anything smaller than the opening can pass through, so keep very small objects toward the front.

Yes, it is a do-it-yourself job. Each module hangs from a keyhole hanger already routed into the back: mark the screw positions, fit a wall fixing suited to your wall type, and drop each piece into place. Once hung, no bracket shows, and the one mounting hardware set in the box covers all five pieces.

Not large ones. Each piece takes a single keyhole hanger, so there is one small screw hole per module rather than a wide bracket footprint. You still need to fix into a suitable wall fixing for your own wall type, and that means a small hole either way, so the mounting is not fully damage-free.